Washing Machine Loud Noise and Rubbing Sound

When your washing machine starts acting up with loud and grinding noises, it’s usually a sign that something deep inside is going wrong. Over the years, I’ve worked on everything from top brands like Nikai, Samsung, and Siemens, especially across homes in Abu Dhabi and Dubai. One of the most disturbing sounds I encountered was a rattling, almost like a coin or bra wire was trapped inside. Turns out, small objects like buttons, zippers, and even hair often get stuck between the drum and the seal—causing scraping or clanking sounds.

Drum Bearing Failure and Squeaking Sounds

To start, unplug your washer and gently open the door. Try to turn the drum with your hand. If you feel zero resistance, the bearing might be worn out. A healthy drum should move freely, but not spin like it’s floating. A circular metal object with small balls inside called a bearing can wear, fall apart, or lose lubrication, resulting in squeaking, rubbing, or even grinding.

Shock Absorber, Springs, and Dampening Strap Faults

I once repaired a unit where the main shock absorber had broken off its spring. That made the front loader vibrate wildly during the spin cycle. In top load machines, dampening straps and springs serve a similar function, holding the tub in the centered position. If the strap or spring falls off, it can’t support the movement properly, and it’s easy to spot this if your washer tilts or bounces during operation.

Drive Pulley, Motor Coupling, and Clutch Issues

Now, check the drive pulley and motor coupling. A worn-out pulley or broken coupling will cause slipping or bad clutch engagement, leading to banging and a rumbling noise. I’ve also seen this issue arise when washers are overloaded, putting stress on internal plastic parts which eventually break.

Clogged Drain Pump and Noisy Water Draining

Another common fault is a clogged drain pump. It might sound like a whistling, clicking, or horrendous buzz, especially when the washer drains water at certain intervals. If you hear something like an old movie projector, suspect a blocked inlet valve or jammed filter. I’ve found trapped debris, coins, and even rubber pieces during servicing.

Transmission and Agitator Directional Cogs Problems

It’s also crucial to look under the washer. If the transmission or agitator directional cogs are worn, the agitator won’t engage or reverse properly. This is especially true in machines with a dual action design where the upper part should turn one way and the bottom the other. Failure here causes scraping and poor agitation.

Belt, Support, and Frame Damage

Sometimes the issue lies with something simple—detached supports, weak springs, or a loose belt can cause a thunderous, banging sound. I’ve found items like underwire and trapped coins wreaking havoc, leading to even more serious damage or flooding if not addressed in time.

Inlet Valve and Water Filling Noises

If the washer doesn’t fill, the inlet valve could be rusty or blocked due to high pressure, especially in older homes. Always check the pressure, listen for a gentle rushing sound when filling, and ensure the valve isn’t stuck.

Cleaning Services Abu Dhabi and Dubai Appliance Fixing Near Me

For cleaning services or a reliable laundry repairman, I always recommend local appliance fixing near me searches. In Abu Dhabi, calling a verified repairman at +971 503401780 can save you time before things turn into a complete failure. Whether it’s a washer, dryer, or maintenance for household units, timely inspection and grease for mechanical parts can prevent disasters.