- If your washing machine stops draining after a repair, it can leave water in the drum and make your clothes wet and heavy.
- Common issues include a clogged hose, faulty pump, or broken switch affecting the spin and rinse cycles.
- Check for kinked or blocked drain hoses and ensure the tub isn’t overfilled or unbalanced.
- Siemens machines may show E:18 or F:18 codes, indicating problems with the valve or motor.
- Some minor issues can be fixed at home, but complex issues like a broken drive belt or water level valve may need a repair person.
- Regular maintenance can prevent damp laundry, bad smells, and mould buildup in the washer.
- Ensure proper load transfer after each wash cycle to avoid remaining water in the drum.
- Identifying the cause early helps reduce headaches, delays, and unexpected panic while ensuring fresh laundry.

Check Your Washing Machine in Following Ways
- Inspect the Drain Hose for Kinks or Bends
When your washing machine is not draining properly, begin by checking the drain hose. Ensure it’s not bent, kinked, or twisted, as these can block the water flow. A simple inspection can often solve the issue. If you notice any bends, straightening the hose might fix the problem and get your machine working again.
- Clear Blockages in the Drain Hose
If straightening the hose doesn’t help, disconnect it carefully using a screwdriver or a clamp. Look inside the hose for coins, buttons, or debris that might be stuck. Clearing these blockages is necessary to ensure proper drainage. If there is a clog deeper in the system or pump, you’ll need to scoop out the water using a bucket, cup, or bowl to avoid a mess.
- Remove Excess Water from the Drum
To prevent spills, remove as much water as possible before working on the hose. Though tedious and time-consuming, it’s a necessary step. Use a sponge and towels to clean any remaining moisture. Once the water is mostly drained, gravity will help remove the rest naturally.
- Address E18 Error and Front Panel Obstructions
An E18 error usually means the hose is blocked or obstructed. In some cases, a piece of clothing, such as a sock, might be stuck in the front panel, causing the machine to malfunction. Removing the obstruction can restore proper drainage.
- Check for Clogs and Follow the Manual
If your washer still doesn’t drain, inspect for more clogs and refer to the manual for additional guidance. Even if you’re not an expert, a bit of patience and attention can go a long way in fixing the problem without needing a professional.
- Prevent Future Drainage Issues
Maintaining the drain system and pump regularly can prevent future drainage issues. Clearing blockages and ensuring the hose is not obstructed will help keep your washing machine in good condition.
- Final Check for Hidden Items
Lastly, always inspect for hidden items like coins, buttons, and small clothing items that can block the hose. These small steps can save you time and money while keeping your machine functioning smoothly.
Schedule Washing Machine One Touch Repair
When your washing machine faces a problem, it’s important to schedule a repair quickly. A professional technician can check the components, diagnose the issue, and offer a solution—whether it’s a broken pump, loose belt, or drain issue. With One Touch service, you can easily book an appointment and arrange a visit at your convenience. Regular maintenance and timely repairs keep your appliance in working order, avoiding unexpected breakdowns and ensuring smooth operation.